Dr. Maria Luisa Delgado Tienda - CMI Business School
 

Dr. Maria Luisa Delgado Tienda

Faculty and Research

Professor Dr. Maria Luisa Delgado Tienda

Education

  • Doctor of Materials Science and Engineering. Universidad Carlos III de Madrid.
  • Materials Science and Engineering Master. Universidad Carlos III de Madrid.
  • Bachelor in Chemistry, Universidad de Córdoba.

Areas of Interest

  • Implementation and maintenance of Quality Management System based in ISO9001, ISO15189 and ISO14001.
  • Productive Process Organization based in Lean, Six Sigma and Kaizen methodology.

Biography

The career of Maria Luisa Delgado is mainly focused on the field of Engineering. With a PhD in Materials Science and Engineering, she acquired knowledge related to powder metallurgy, the study of powdered metals, processes and characterizing, and consolidation techniques, specifically, extrusion and sintering of aluminum alloys and matrix composite materials. As a result of this work, Maria Luisa Delgado has numerous publications and contributions to congresses, and allowed her to reside in countries such as Australia or the United States where she made part of her doctoral thesis.

After joining the private sector, her career focuses mainly on the maintenance and management of Quality Systems, based mainly on ISO 9001. In these years she has worked for several companies in the engineering sector belonging to the OHL group, Veolia group and the Safran aeronautical group.

At the same time, and due to the needs of continuous improvement of the companies, she begins to participate in the optimization of productive processes through Lean, Six Sigma and Kaizen methodology; and the implementation of quality management systems and accreditation / certifications after optimization, also expanding the field of regulations to be used to OHSAS 18001, ISO15189 and ISO 14001.

In recent years, she directs the Department of Lean and Quality and teaches at the Carlos III University to students of the Engineering degree.

Publications

Articles in Research Journals 

  • 2014 based MMC: Propertiesimprovement by (TiCN)p additions. Journal of Materials Science, ISSN 0022-2461, vol. 41, pp.3735- 3741, 2006. Delgado M.L., E.M.RuizNavas, J.M. Torralba.
  • Study of TiCN Additions to an 2xxx Series Aluminum Alloy. Materials Science Forum, ISSN 0255-5476, vol. 534-536, pp.841- 844, 2007. Ruiz-Navas E.M., Delgado Tienda M.L., Benito González S., E. Gordo.
  • Aluminio Pulvimetalúrgico: Desarrollo y Mejora de sus aleaciones y materiales Compuestos. Revista de Metalurgia, ISSN 0034-8570, vol. 44 (3), pp. 206-215, 2008. E.M. Ruiz-Navas, M.L. Delgado, M. Torrralba.
  • Improvement of the bonding interphase of a sintered Al 2014-(Ti5Si3)p composite by the copper coating of the reinforcement. Composites Part A , ISSN 1359-835X, vol. 40, pp. 1283-1290, 2009. E.M. Ruiz-Navas, M.L. Delgado, B. Trindade B.
  • High resolution transmission electron microscopy study on the development of nanostructured precipitates in Al–Cu obtained by mechanical alloying. Materials Chemistry and Physics, ISSN: 0254-0584, vol. 132 (1), pp. 125–130, 2012. L. E. Gómez, M.L. Delgado, E.M. Ruiz-Navas.

 

Chapters

  • Delgado Tienda M.L, Ruiz-Navas E.M., Benito González S., Torralba J.M. Title: “Study of TiCN addition to an 2xxx serie aluminium alloy “ Book references: Perspectiva de la investigación sobre materiales en España en el siglo XXI. ISBN 84-8158-322-7. Volumen: I, Pages, initial: 587 final: 590 Date: 2006.
  • Gómez L., Delgado Tienda M.L., Ruiz-Navas E.M., Torralba J.M. Title: “Study of the obtention of solid solutions of Al-Cu by electronic transmission microscopy”. Book references: Perspectiva de la investigación sobre materiales en España en el siglo XXI. ISBN 84-8158-322-7. Volumen: I, Pages, inicial: 151 final: 154 Date: 2006.
  • M. Ruiz-Navas, M.L. Delgado, E.. Gordo, J.M. Torralba. Title: “Tin addition influence on the optimization of an Al-Cu Alloy High energy Milling and Liquid phase sintering”. Book references: Advances in Powder Metallurgy. ISBN 13-978-0-9793488-9-1, ISBN: 0-9793488-9-7 Volumen: I, Pages, inicial: 5-161 final: 5-174 Date: 2008.

 

Contributions to Congresses

  • Delgado M.L., E.M. Ruiz Navas, J.M. Torralba. Title: “Influence Of Trace Elements And Reinforcement Additions To The Liquid Phase Sintering Of 2xxx Series Aluminium Alloys”. Type of communication: Speaker. Congress: European Conference On Powder Metallurgy, (Euro Pm’2003). Publication: Proceedings of European Conference On Powder Metallurgy (Euro Pm’2003), Vol 2, Pp. 31-36. ISBN 1-872327-397. Place of celebration: Valencia, España. Year: 2003.
  • Delgado M.L., E.M. Ruiz Navas, W.D. Macphee, G.B. Schaffer, J.M. Torralba. Title: “Influence Of Trace Elements, Mechanical Alloying And Reinforcement Additions To Aluminium Alloys”. Type of communication: Speaker. Congress: 9th International Conference On Aluminum Alloys (Icaa 9). Publication: Proceedings 9 th International Conference On Aluminum Alloys (Icaa 9), Edited by J.F. Nie, A. J. Morton and B.C. Muddle, pp.782-786. ISBN- 1-87-6855-223. Place of celebration: Brisbane, Australia. Year: 2004.
  • Delgado M.L., E.M. Ruiz Navas, J.M. Torralba. Title: “Modification Of The Liquid Phase Sintering Of Al-Cu-Mg-Si System Through AlSi Additions”. Type of communication: Speaker. Congress: World Congress Of The European Powder Metallurgy Association (Epma). Publication: Proceedings Of the World Congress of the European Powder Metallurgy Association (Epma), pp.251-256 ISBN 1899072 -5-2. Place of celebration: Viena, Austria. Year: 2004.
  • L. Delgado, E.M. Ruiz-Navas, E. Gordo, J.M. Torralba. Title: “Enhancement of liquid phase sintering through Al-Si additions to Al-Cu systems”. Type of communication: Speaker. Congress: Worldwide Congress of Materials and manufacturing Engineering and Technology. (AMPT´05-COMMENT). Publication: Proceedings of the 8 th International conference on advances in materials and processing Technologies (AMPT’05), pp. 140-143., 2005. ISBN- 83-89728-12-5. Place of celebration: Wisla, Poland. Year: 2005.
  • Delgado M.L., Ruiz Navas E.M, Ribeiro P, Trindade B., Torralba J.M. Title: “Ti5Si3 and MA Ti5Si3 –Cu coatedAdded to 2014 Aluminum Alloy- Liquid Phase Sintering Modification. Microstructure and Properties”. Type of communication: Speaker. Congress: European Conference On Powder Metallurgy (Euro Pm’2005). Publication: Proceedings Del European Conference On Powder Metallurgy (Euro Pm’2005), Vol 2, Pp. 231-236,2005. ISBN 1899072 -8-7. Place of celebration: Praga, Republic Checoslvava. Year: 2005.
  • Ruiz-Navas E.M., Delgado Tienda M.L., Benito González S., E. Gordo. Title: “Study of TiCN Additions to an 2xxx Series Aluminum Alloy”. Type of communication: Poster. Congress: World Congress Of The European Powder Metallurgy Association (Epma). Publication: Extended abstract of 2006 Powder Metallurgy World Congress, vol 2, pp.1037-1038, ISBN 89-5708-122-6. Place of celebration: Busan, Korea. Year: 2006
  • Ruiz-Navas E.M, Delgado Tienda M.L Torralba J.M. Title: “Development of Aluminum Alloys and metal Matrix Composites by Powder Metallurgy”. Type of communication: Speaker. Congress: 4th International Conference on Materials and Manufacturing Technologies . Publication: Book of Abstracts del 4 Th International Conference on Materials and Manufacturing Technologies. Vol.I, pp. 61, 2006. ISBN 973-751-300-2. Advanced Materials Research, voll 23, pp. 51-58, 2007. Place of celebration: Rumania. Year: 2006.
  • Ruiz-Navas E.M, Delgado Tienda M.L, Gordo E., Torralba J.M. Title: “Optimization and Consolidation of a Al-Cu PM Alloy Obtained by Mechanical Alloying”. Type of communication: Speaker. Congress: European Conference On Powder Metallurgy (Euro Pm’2007). Publication: Proceedings Del European Conference On Powder Metallurgy (Euro Pm’2007), Vol 2, Pp. 77-82, 2007. ISBN 978-1-899072-30-9. Place of celebration: Tolouse, France. Year: 2007.
  • M. Ruiz-Navas, M.L. Delgado, E.. Gordo, J.M. Torralba. Title: “Tin addition influence on the optimization of an Al-Cu Alloy High energy Milling and Liquid phase sintering”. Type of communication: Speaker. Congress: World Congress on Powder Metallurgy and Particulate Materials (2008). Particulate Materials, pp. 5-161-5-174, Publication: Advances in Powder Metallurgy 2008. Edited by MPIF (Metal Powder Industries Federation). ISBN 13-978-0-9793488-9-1, ISBN: 0-9793488-9-7. Place of celebration: Washintong D.C., United States. Year: 2008.
  • M. Ruiz-Navas, E.Gordo, M.L. Delgado Tienda. Title: Tin Influence during on Sintering of Prealloyed and Premixed Al-Cu Powders. Type of communication: Speaker. Congress: World Congress PM2010 Publication: Proceedings World PM2010: International Powder Metallurgy Congress & Exhibition, (CD-Rom). (ISBN: 978-1899072194). Place of celebration: Florence, Italy. Year: 2010.
  • Delgado Tienda M.L, Ruiz-Navas E.M., Benito González S., Torralba J.M. Title: “Estudio de la Adición de TiCN a una Aleación de la Serie 2xxx “ Type of communication: Poster. Congress: IX Congreso Nacional De Materiales. Publication: Perspectiva de la investigación sobre materiales en España en el siglo XXI, vol. Pp.587-590, Ed Universidad de Vigo, ISBN 84-8158-322-7. Place of celebration: Vigo, Spain. Year: 2006.
  • Gómez L., Delgado Tienda M.L., Ruiz-Navas E.M., Torralba J.M. Title: “Estudio de la obtención de solución sólida de al-cumediantemicroscopia electrónica de transmisión” Type of communication: Poster. Congress: IX Congreso Nacional De Materiales Publication: Perspectiva de la investigación sobre materiales en España en el siglo XXI, vol. Pp.587-590, Ed Universidad de Vigo, ISBN 84-8158-322-7. Place of celebration: Vigo, Spain. Year: 2006.
  • M. Ruiz-Navas, M.L. Delgado, J.M. Torralba. Title: “Aluminio Pulvimetalúrgico: Desarrollo y Mejora de sus aleaciones y materiales Compuestos” Type of communication: Speaker. Congress: I Congreso Nacional de Pulvimetalurgia. Publication: Libro de resúmenes. Revista de Metalurgia. Place of celebration: Leganés, Spain. Year: 2006.
  • M. Ruiz-Navas, M.L. Delgado, J.M. Torralba. Title: “Estudio de la Sinterización de Aleaciones y Materiales Compuestos base Aluminio”. Type of communication: Speaker. Congress: I Congreso Nacional de Pulvimetalurgia. Publication: Libro de resúmenes. Revista de Metalurgia. Place of celebration: Leganés, Spain. Year: 2006.